Skip to main content
English
Dutch

Translating step 18

Step 18
The end is in sight, and we're powering through the remaining components in the rear case. This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back. Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.
  • The end is in sight, and we're powering through the remaining components in the rear case.

  • This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back.

  • Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.

  • And lastly, the Taptic Engine and famed barometric vent are freed. Apple's Taptic Engine continues to be a linear oscillator vibration motor.

Het einde is in zicht en we gaan vastbesloten door tot we de overige onderdelen onder de loep hebben genomen.

Dit eerste kleine paneeltje zit vol met veeraansluitingen en EMI 'grounding fingers' en heeft een lintkabel aan de achterkant zitten.

Het volgende dat eruit komt is de onderste speakerbehuizing, vol met sticky-yicky waterdichte lijm om de poort heen.

Tot slot komen de trilmotor en de geprezen barometrische ventilator eruit. De trilmotor van Apple is nog steeds een lineair oscillerende trilmotor.

Your contributions are licensed under the open source Creative Commons license.