Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Italian

Translating step 17

Step 17
The end is in sight, and we're powering through the remaining components in the rear case. This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back. Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.
  • The end is in sight, and we're powering through the remaining components in the rear case.

  • This first little bracket is covered in spring connectors and EMI grounding fingers, and has a ribbon cable stuck to the back.

  • Next out is the lower speaker enclosure, replete with ooey gooey waterproofing adhesive around the port.

  • And lastly, the Taptic Engine and famed barometric vent are freed. Apple's Taptic Engine continues to be a linear oscillator vibration motor.

La fine è vicina e noi lavoriamo sui componenti rimasti nel case posteriore.

Questa prima piccola staffa è ricoperta di connettori a molla e di spazzole di messa a terra EMI; ha un cavo a nastro fissato sul dorso.

Il prossimo a uscire è la copertura dell'altoparlante inferiore, piena di melassa adesiva impermeabile attorno alla porta.

Infine, liberiamo il TapticEngine e l'ormai celebre sfiato barometrico. Il Taptic Engine di Apple continua a sfruttare un oscillatore lineare per il motore di vibrazione.

Your contributions are licensed under the open source Creative Commons license.