Skip to main content
English
Chinese

Translating step 4

Step 4
This pentalobe looks weirdly unfinished. The bottom screws are more like pins if we're honest. This screw moves the threaded section from the display to the steel frame, and extends the unthreaded section into a freakishly long pin. Our best guess is that this allows the display a bit of flexibility, while also allowing it to move its mounting bracket toward the interior of the phone, incidentally making room for a beefed-up Lightning connector.
  • This pentalobe looks weirdly unfinished. The bottom screws are more like pins if we're honest.

  • This screw moves the threaded section from the display to the steel frame, and extends the unthreaded section into a freakishly long pin.

  • Our best guess is that this allows the display a bit of flexibility, while also allowing it to move its mounting bracket toward the interior of the phone, incidentally making room for a beefed-up Lightning connector.

  • Luckily, it looks like they haven't rearranged too much else, as our typical trifecta of iOpener, iSclack, and iFixit Opening Picks works as in the past.

  • That means no significant change in resistance, and the OLED is well supported by a frame, unlike some displays we know.

五角梅花螺丝看样子像是个未完成品,但实际上它看起来更像是个插销

螺丝将螺纹从显示屏位置移动到了不锈钢框架位置,并将无螺纹部分延长成了奇怪的插销状

我们猜测,这可以让显示屏有灵活性,允许其将安装支架更深入手机内部,并且可以为加强型Lighting接口提供空间

幸运的是,苹果似乎并没有重构过多的设计,我们传统的iOpeneriSclack以及撬片足以完成工作

这意味着不需要更大的抓力便可将OLED显示屏很好地固定在中框上,不像是我们拆解过某些屏幕

Your contributions are licensed under the open source Creative Commons license.