Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 2

Step 2
Remove the four silver Torx T5 x 3mm screws holding the heat sink onto the main processor.
  • Remove the four silver Torx T5 x 3mm screws holding the heat sink onto the main processor.

Entferne vier silberfarbene 3 mm Torx T5 Schrauben, welche den Kühlkörper am Prozessor befestigen.

Your contributions are licensed under the open source Creative Commons license.