Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Chinese

Translating step 1

Step 1
Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair.
  • Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair.

  • The display is strongly glued to the frame of the device.

  • To remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or iOpener. In a pinch, a hair dryer can also work.

  • Be careful when using a heat gun, as too much heat can permanently damage the display and/or battery.

  • Steadily and evenly heat the perimeter of the display until it's too hot to touch, and try to maintain that temperature for several minutes.

先加热好iOpener,然后放到设备的一个边上进行加热

请注意!热风枪或者吹风机也可以进行加热操作,但请注意可能会对屏幕及屏幕其他部分有损坏的高风险

Your contributions are licensed under the open source Creative Commons license.