Skip to main content
English
Chinese

Translating step 7

Step 7
Using an 8mm wrench and phillips screwdriver, remove the magnet mounts from the body of the motor. The magnet will slide out of  the motor . Inspect the magnet and motor for anything that may cause a hang-up.
  • Using an 8mm wrench and phillips screwdriver, remove the magnet mounts from the body of the motor.

  • The magnet will slide out of the motor . Inspect the magnet and motor for anything that may cause a hang-up.

  • Do not over-tighten the magnet mounts during reassembly. Over-tightening may cause the motor to bind.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.