Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 33 guides that include this step.

English
Japanese

Translating step 2

Step 2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • Carefully lift the I/O board and remove it from the lower case.

基板にI/Oボードを固定している3.1 mm T5トルクスネジを2本外します。

ゆっくりとI/Oボードを持ち上げて底ケースから取り出します。

Your contributions are licensed under the open source Creative Commons license.