Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 33 guides that include this step.

English
German

Translating step 2

Step 2
Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. Carefully lift the I/O board and remove it from the lower case.
  • Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board.

  • Carefully lift the I/O board and remove it from the lower case.

Entferne die beiden 3,1 mm T5 Torx-Schrauben, mit denen das I/O Board am Logic Board befestigt ist.

Hebe das I/O Board vorsichtig an und entferne es aus dem unteren Gehäuse.

Your contributions are licensed under the open source Creative Commons license.