Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

English
Italian

Translating step 3

Step 3
Peel back any tape covering the keyboard ribbon cable connector.
  • Peel back any tape covering the keyboard ribbon cable connector.

Usa l'estremità piatta di uno spudger per sbloccare la linguetta di fissaggio sullo zoccolo ZIF del cavo a nastro del microfono.

Accertati di far leva sulla linguetta di bloccaggio incernierata e non sullo zoccolo.

Usa l'estremità piatta di uno spudger per tirare fuori dalla sua sede il cavo a nastro della tastiera.

[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Use the flat end of a spudger to pull
Peel back any tape covering the keyboard ribbon cable out of its socketconnector.
[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Use the flat end of a spudger to pull
Peel back any tape covering the keyboard ribbon cable out of its socketconnector.

Your contributions are licensed under the open source Creative Commons license.