Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

English
German

Translating step 3

Step 3
Peel back any tape covering the keyboard ribbon cable connector.
  • Peel back any tape covering the keyboard ribbon cable connector.

Klappe mit dem flachen Ende eines Spudgers die Halteklappe an der ZIF-Buchse des Tastatur-Flachbandkabels nach oben.

Vergewissere dich, dass du den Hebel nicht an der Buchse selbst, sondern an der Halteklappe ansetzt.

Verwende das flache Ende eines Spudgers, um das Tastatur-Flachbandkabel aus der Buchse zu ziehen.

[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Use the flat end of a spudger to pull
Peel back any tape covering the keyboard ribbon cable out of its socketconnector.
[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Use the flat end of a spudger to pull
Peel back any tape covering the keyboard ribbon cable out of its socketconnector.

Your contributions are licensed under the open source Creative Commons license.