Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
This brief summary will only appear in search results.
Communicate background information before the reader dives into the guide.
Step 1
Remove the Philips screw holding the steam oven to the cabinet.
Step 2
Pull the oven out of the cabinet by about 10-15cm (4" to 6" inches). Secure the door with some tape to the top of the oven.
Step 3
The front control panel is held in place with 4 screws (TR20) on the back of the panel. Those can sometimes be tight. (Sorry, no pictures available). The screws can either be felt or seen, depending on how far the oven was pulled out of the cabinet.
Step 4
Disconnect the ribbon cable from the switch to the display. Remove the 5 screws holding the switch to the panel. Remove the switch.
Your contributions are licensed under the open source Creative Commons license.