Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 45 guides that include this step.

English
Chinese

Translating step 2

Step 2
Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
  • Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.

  • Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

使用撬棒的尖端来推动相机线缆位于逻辑板插座上的链接头。

确保推动方向与逻辑板相平行,先推动一侧,然后让链接头从插座中“走”出来。

[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.
[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

Your contributions are licensed under the open source Creative Commons license.