Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 40 guides that include this step.

English
Japanese

Translating step 3

Step 3
Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Starting at the top of the cable, slide a plastic opening tool under the right fan cable to free it from the logic board.

  • Use caution when freeing the cable, as it is strongly adhered to the logic board.

スパッジャーの先端を使って、右側ファンのリボンケーブルのZIFソケット上の固定フラップを持ち上げて裏返します。

固定フラップの蝶番部分をこじ開けてください。ソケット自体には接触しないでください。

右側ファンケーブルの下に差し込んだプラスチック製の開口ツールをケーブル上部からスライドして、基板から解放します。

ケーブルを外す際はご注意ください。基板に多量の接着剤で固定されています。

[* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF[guide|25629|ZIF|stepid=64969|new_window=true] socket.
[* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF[guide|25629|ZIF|stepid=64969|new_window=true] socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Starting at the top of the cable, slide a plastic opening tool under the right fan cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to the logic board.

Your contributions are licensed under the open source Creative Commons license.