Skip to main content
English
Japanese

Translating step 2

Step 2
Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield. If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.
  • Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield.

  • If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

Y000ドライバーを使って、EMIシールドの片側から1.1 mm ネジを3本外します。

これらのネジが硬くて緩まない場合は、ネジを回しながらネジを強く押し込んでください。 必要に応じて、スパッジャーの平面側先端を使って、各ディスプレイに留められたクリップを後ろからサポートしながら作業を続けると、クリップを曲げることなくネジにより力を加えることができます。

Your contributions are licensed under the open source Creative Commons license.