Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.
Translating step 2
Slide a spudger under the ambient light sensor flex cable, and lift the sensor out of its housing.
|[* icon_caution] The sensors on this step are fragile. To increase your chances of removing them without damage, use your iOpener or hair dryer to apply heat to the upper portion of the display before you proceed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up.|
|-||[* black] Slide a spudger under the |
|+||[* black] Slide a spudger under the sensor flex cable, and lift the sensor out of its housing.|