Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 2

Step 2
The sensors on this step are fragile. To increase your chances of removing them without damage, use your iOpener or hair dryer to apply heat to the upper portion of the display before you proceed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up. Slide a spudger under the ambient light sensor flex cable, and lift the sensor out of its housing.
  • The sensors on this step are fragile. To increase your chances of removing them without damage, use your iOpener or hair dryer to apply heat to the upper portion of the display before you proceed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up.

  • Slide a spudger under the ambient light sensor flex cable, and lift the sensor out of its housing.

I sensori trattati in questo passaggio sono fragili. Per aumentare le probabilità di rimuoverli senza danneggarli, prima di procedere usa il tuo iOpener o un asciugacapelli per scaldare la parte superiore dello schermo. In alternativa, prima di agire su di essi, applica una o due gocce di alcool isopropilico e lascia che penetrino sotto il sensore.

Fai scorrere uno spudger sotto il cavo flessibile del sensore di luminosità ambientale e sollevalo fuori dal suo alloggiamento.

Your contributions are licensed under the open source Creative Commons license.