Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 2

Step 2
The sensors on this step are fragile. To increase your chances of removing them without damage, use your iOpener or hair dryer to apply heat to the upper portion of the display before you proceed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up. Slide a spudger under the ambient light sensor flex cable, and lift the sensor out of its housing.
  • The sensors on this step are fragile. To increase your chances of removing them without damage, use your iOpener or hair dryer to apply heat to the upper portion of the display before you proceed. Alternatively, add a drop or two of isopropyl alcohol and let it penetrate under the sensors before you pry them up.

  • Slide a spudger under the ambient light sensor flex cable, and lift the sensor out of its housing.

Les capteurs de cette étape sont fragiles. Pour les retirer sans les endommager, utilisez votre iOpener ou votre sèche-cheveux pour chauffer la partie supérieure de l'écran avant de continuer. Vous pouvez également ajouter une ou deux gouttes d'alcool isopropylique et le laisser pénétrer sous les capteurs avant de les soulever.

Faites glisser une spatule (spudger) sous la nappe du capteur de luminosité ambiante et soulevez le capteur hors de son emplacement.

Your contributions are licensed under the open source Creative Commons license.