Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
French

Translating step 8

Step 8
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • To disconnect the cable, squeeze the release clip on the back side of the connector, behind the logic board, and pull the connector straight out.

Faites très attention à ne pas toucher les fils du condensateur ou les joints de soudure exposés à l'arrière de l'alimentation. Ne manipulez la carte que par les bords.

Ne laissez aucun des joints de soudure exposés entrer en contact avec une surface métallique, car cela peut provoquer un court-circuit.

Retournez l'alimentation pour accéder à la connexion du câble d'alimentation Courant Continu derrière la carte mère.

Pour déconnecter le câble, appuyez sur le clip de maintien à l'arrière du connecteur, derrière la carte mère, et tirez le connecteur tout droit.

Your contributions are licensed under the open source Creative Commons license.