Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Dutch

Translating step 4

Step 4
Note that the CPU will most likely remain stuck to the underside of the heat sink as it's lifted out. Take care not to damage it.
  • Note that the CPU will most likely remain stuck to the underside of the heat sink as it's lifted out. Take care not to damage it.

  • Lift and remove the heat sink assembly from the logic board.

  • When reassembling your iMac, remove the CPU from the heat sink and reinstall it separately from the heat sink. This will make sure it's installed correctly and prevent damage.

  • Follow our thermal paste application guide to reapply the thermal paste to the graphics processor (GPU). You should also replace the heavy thermal compound or apply thermal pads to the VRAM chips.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.