Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 26

Step 26
Insert a Battery Blocker or other insulator underneath the logic board to separate it from the battery connector. The battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Don't significantly deform the the logic board as you do this. Don't twist or swing the pick side to side. Leave it there to prevent the battery connector leads from making contact until you have completed your repairs.
  • Insert a Battery Blocker or other insulator underneath the logic board to separate it from the battery connector.

  • The battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Don't significantly deform the the logic board as you do this. Don't twist or swing the pick side to side.

  • Leave it there to prevent the battery connector leads from making contact until you have completed your repairs.

  • The rest of the images in this guide show the logic board EMI shield reinstalled, which is incorrect. Follow the instructions, but keep the battery disconnected and do not reinstall the EMI shield until your repairs are complete.

Infila un blocca batterie o un altro isolante sotto la scheda madre per separarla dal connettore della batteria.

Il blocca batteria è un metodo obsoleto per isolare la batteria, poiché rischi di danneggiare i contatti sotto la scheda madre. Se usi questo metodo, stai molto attento ad infilarlo delicatamente e dritto in direzione della scheda madre. Non deformare la scheda madre mentre lo infili. Non girare o far scorrere lateralmente il blocco.

Lascia il blocco in questa posizione per evitare che i capi del connettore facciano contatto finché non hai finito la riparazione.

Il resto delle immagini in questa guida mostra la schermatura EMI reinstallata sulla scheda madre, il che è sbagliato. Segui le istruzioni ma tieni la batteria scollegata e la schermatura EMI rimossa finché non hai finito la riparazione.

Your contributions are licensed under the open source Creative Commons license.