Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 26

Step 26
Insert a Battery Blocker or other insulator underneath the logic board to separate it from the battery connector. The battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Don't significantly deform the the logic board as you do this. Don't twist or swing the pick side to side. Leave it there to prevent the battery connector leads from making contact until you have completed your repairs.
  • Insert a Battery Blocker or other insulator underneath the logic board to separate it from the battery connector.

  • The battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Don't significantly deform the the logic board as you do this. Don't twist or swing the pick side to side.

  • Leave it there to prevent the battery connector leads from making contact until you have completed your repairs.

  • The rest of the images in this guide show the logic board EMI shield reinstalled, which is incorrect. Follow the instructions, but keep the battery disconnected and do not reinstall the EMI shield until your repairs are complete.

Setze ein spezielles Akkutrennstück (battery blocker) oder einem anderes Isolierwerkzeug unter das Logic Board ein, damit es keinen Kontakt zu den Akkuanschlüssen mehr hat.

Das Isolieren des Akkus mit diesem Akkutrennstück (bzw. battery blocker) ist überholt, du riskierst damit, die Akkukontakte unter dem Akku zu beschädigen. Wenn du das Trennstück trotzdem verwenden willst, dann setze es äußerst behutsam und nur genau in Richtung des Logic Boards ein. Verdrehe es nicht und bewege es nicht seitlich hin und her.

Lasse es dort stecken, damit die Akkuanschlüsse keinen Kontakt bekommen, solange du arbeitest.

Bei den restlichen Bildern dieser Anleitung ist die EMI-Abschirmung eingebaut zu sehen. Das ist falsch. Folge den Schritten weiter, halte den Akku abgetrennt und baue die EMI-Abschirmung nicht wieder ein, bevor die Reparatur zu Ende ist.

Your contributions are licensed under the open source Creative Commons license.