Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 24

Step 24
Lift the logic board EMI shield from the edge nearest the top of the iPad. Peel the EMI shield up from the logic board. This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
  • Lift the logic board EMI shield from the edge nearest the top of the iPad.

  • Peel the EMI shield up from the logic board.

  • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

  • Remove the logic board EMI shield.

ロジックボードのEMIシールドをiPadの上部端付近から持ち上げます。

EMIシールドをロジックボードから剥がします。

多くの小さなクリップがシールドを固定しているため、若干の力が必要です。シールドがわずかに変形することがあります。それでも問題ありません。変形を極力小さくしてください。再装着する際にネジを留めると、形状が戻ります。

ロジックボードのEMIシールドを取り出します。

Your contributions are licensed under the open source Creative Commons license.