Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 24

Step 24
Lift the logic board EMI shield from the edge nearest the top of the iPad. Peel the EMI shield up from the logic board. This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
  • Lift the logic board EMI shield from the edge nearest the top of the iPad.

  • Peel the EMI shield up from the logic board.

  • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

  • Remove the logic board EMI shield.

Solleva la schermatura EMI della scheda madre prendendola dal bordo più vicino alla parte superiore dell'iPad.

Rimuovi la schermatura EMI dalla scheda madre.

Questa procedura richiede una certa forza per liberare diversi ganci che fissano la schermatura, che si può deformare leggermente. Non è un problema: cerca di minimizzare la deformazione e tornerà piatta una volta riagganciata e riavvitata.

Rimuovi la schermatura EMI della scheda madre.

Your contributions are licensed under the open source Creative Commons license.