Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 2

Step 2
Removing the display assembly involves using a halberd spudger or opening pick to separate the adhesive securing the display to the rear case. Use the photos in this step to know the locations of the adhesive and where it is the thickest. Refer to these images while following the guide to see where the adhesive is thickest and where to cut the deepest with your opening tool.
  • Removing the display assembly involves using a halberd spudger or opening pick to separate the adhesive securing the display to the rear case.

  • Use the photos in this step to know the locations of the adhesive and where it is the thickest.

  • Refer to these images while following the guide to see where the adhesive is thickest and where to cut the deepest with your opening tool.

ハルバードスパッジャーもしくは開口ピックを使って、ディスプレイアセンブリとリアケースを固定している接着剤を切開します。

この手順の画像を使って、どの部分に多量の接着剤が使用されているかを知っておきましょう。

画像を参照して、接着剤が厚い部分を知っておけば、開口ツールで切開する深さを大きくできます。

Your contributions are licensed under the open source Creative Commons license.