Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Chinese

Translating step 12

Step 12
If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger. Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick. Continue to slide the blade of the halberd spudger to the upper right corner of the iPad.
  • If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger.

  • Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick.

  • Continue to slide the blade of the halberd spudger to the upper right corner of the iPad.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.