Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 12

Step 12
If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger. Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick. Continue to slide the blade of the halberd spudger to the upper right corner of the iPad.
  • If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger.

  • Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick.

  • Continue to slide the blade of the halberd spudger to the upper right corner of the iPad.

必要に応じて、iOpenerを再度温めて、デバイス上部端に載せます。接着剤が柔らかくなるまで数分間待ち、ハルベルドスパッジャーのブレードを差し込みます。

開口ピックの反対側にあるフロント向きカメラを通り越した位置にブレードを差し込みます。

iPadの右上コーナーに沿って、スパッジャーのブレードをスライドします。

Your contributions are licensed under the open source Creative Commons license.