Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 10

Step 10
Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften. Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step. Slide the blade along the top edge of the iPad, stopping before reaching the front-facing camera.
  • Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.

  • Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step.

  • Slide the blade along the top edge of the iPad, stopping before reaching the front-facing camera.

iOpenerを再度温めて、デバイスの上部端に載せます。2-3分間待機して、接着剤を柔らかくします。

フロントパネルが適度に温まったら、ハルベルドスパッジャーのブレードを前の手順で残したピックの横に差し込みます。

iPadの上部端に沿ってブレードをスライドします。フロント向きカメラの手前で止めてください。

Your contributions are licensed under the open source Creative Commons license.