Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 10

Step 10
Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften. Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step. Slide the blade along the top edge of the iPad, stopping before reaching the front-facing camera.
  • Reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.

  • Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step.

  • Slide the blade along the top edge of the iPad, stopping before reaching the front-facing camera.

Erwärme erneut den iOpener und lege ihn auf die Oberkante des Geräts. Warte ein paar Minuten, damit der Kleber aufweichen kann.

Wenn das Frontpanel heiß genug ist, dann setze die Klinge eines Hellebardenspudgers neben dem Plektrum aus dem vorigen Schritt ein.

Schiebe die Klinge entlang der Oberkante des iPad, halte vor der Frontkamera an.

Your contributions are licensed under the open source Creative Commons license.