Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Chinese

Translating step 8

Step 8
Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera. After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick. Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.
  • Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.

  • After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.

  • Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.