Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 8

Step 8
Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera. After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick. Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.
  • Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.

  • After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.

  • Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.

iOpenerをiPadの左上コーナーに沿って載せます。フロント向きカメラと開口ピックに沿ってください。

接着剤が柔らかくなったら、ハルベルドスパッジャーのブレードをiPad上の開口ピック付近に差し込みます。

iPadの左上に沿って、フロント向きカメラに向けて、ハルベルドスパッジャーで接着剤を切開します。この作業中、複数回に渡ってiPadの端を温めなければなりません。

Your contributions are licensed under the open source Creative Commons license.