Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 8

Step 8
Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera. After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick. Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.
  • Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.

  • After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.

  • Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.

Coloca un iOpener caliente a lo largo de la esquina superior izquierda del iPad, que abarca desde la púa de apertura hasta la cámara frontal.

Después de dejar que el adhesivo se ablande, inserta la cuchilla de tu spudger de alabarda en el iPad por encima de la púa de apertura.

Corta el adhesivo a lo largo del lado superior izquierdo del iPad hacia la cámara frontal usando el spudger de alabarda. Esto puede requerir recalentar el borde del iPad.

Your contributions are licensed under the open source Creative Commons license.