Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 6

Step 6
Remove two 5 mm T6 Torx screws securing the AirPort/Bluetooth board to the logic board. Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.
  • Remove two 5 mm T6 Torx screws securing the AirPort/Bluetooth board to the logic board.

  • Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.

  • Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the connector off the logic board.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.