Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Chinese

Translating step 1

Step 1
Remove the single 5 mm T6 Torx screw securing the IR board bracket to the logic board. The IR board and cable finger are now free from the logic board and may fall.
  • Remove the single 5 mm T6 Torx screw securing the IR board bracket to the logic board.

  • The IR board and cable finger are now free from the logic board and may fall.

  • Remove the IR cable finger and move the IR board, with cable still attached, out of the way.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.