Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
Italian

Translating step 2

Step 2
Remove the two 5 mm T6 Torx screws securing the display data cable to the logic board. Using its attached black tab, pull the display data cable connector up off the logic board.
  • Remove the two 5 mm T6 Torx screws securing the display data cable to the logic board.

  • Using its attached black tab, pull the display data cable connector up off the logic board.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.