Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 25 guides that include this step.

English
Spanish

Translating step 8

Step 8
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.

Ten mucho cuidado de no tocar los cables del condensador o cualquier junta de soldadura expuesta en la parte posterior de la fuente de alimentación. Solo maneja el tablero por los bordes.

Voltea la fuente de alimentación para acceder a la conexión del cable de alimentación de CC detrás de la placa lógica.

Presiona la lengüeta en la parte posterior del conector del cable de alimentación de CC y extraela de su zócalo en la parte posterior de la placa lógica.

Your contributions are licensed under the open source Creative Commons license.