Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 19

Step 19
The original RAM module closer to the logic board has a thermal pad adhered to its top side (facing away from the logic board, between the two DIMMs). Peel off and transfer the thermal pad from the original RAM stick to your replacement RAM before you install it in the lower slot.
  • The original RAM module closer to the logic board has a thermal pad adhered to its top side (facing away from the logic board, between the two DIMMs).

  • Peel off and transfer the thermal pad from the original RAM stick to your replacement RAM before you install it in the lower slot.

El módulo RAM original más cercano a la placa lógica tiene una almohadilla térmica adherida a su lado superior (mirando hacia afuera de la placa lógica, entre los dos DIMM).

Despega y transfiere la almohadilla térmica de la memoria RAM original a la RAM de reemplazo antes de instalarla en la ranura inferior.

Your contributions are licensed under the open source Creative Commons license.