Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 12

Step 12
Flip the latch on the microphone ZIF connector and pull the cable out of its socket on the logic board. The microphone cable is delicate, so be careful not to damage it in later steps. If necessary, gently tape it down to the front of the iMac's enclosure to keep it out of harm's way. The microphone cable is delicate, so be careful not to damage it in later steps. If necessary, gently tape it down to the front of the iMac's enclosure to keep it out of harm's way.

Gira el pestillo del conector ZIF del micrófono y extraiga el cable de su zócalo en la placa lógica.

El cable del micrófono es delicado, así que tenga cuidado de no dañarlo en los pasos posteriores. Si es necesario, pégalo suavemente en la parte frontal de la carcasa del iMac para evitar daños.

Your contributions are licensed under the open source Creative Commons license.