Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 15

Step 15
When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left.
  • When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left.

  • Lift the logic board straight up and out of the iMac.

  • Be careful not to snag the board on any of the rear enclosure's screw posts.

Al retirar e instalar la placa lógica, tenga cuidado de no dañar el delicado cable plano del micrófono en la parte inferior izquierda.

Levanta la placa lógica hacia arriba y hacia afuera del iMac.

Ten cuidado de no enganchar la placa en ninguno de los postes de tornillo de la carcasa trasera.

Your contributions are licensed under the open source Creative Commons license.