Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 13

Step 13
Remove the four 7.3 mm T8 Torx screws securing the logic board to the rear enclosure.
  • Remove the four 7.3 mm T8 Torx screws securing the logic board to the rear enclosure.

Retira los cuatro tornillos Torx T8 de 7.3 mm que sujetan la placa lógica al gabinete trasero.

Your contributions are licensed under the open source Creative Commons license.