Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Spanish

Translating step 2

Step 2
Remove the two T6 Torx screws securing the display data cable to the logic board. Use the attached black tab to pull the display data cable connector straight away from the logic board.
  • Remove the two T6 Torx screws securing the display data cable to the logic board.

  • Use the attached black tab to pull the display data cable connector straight away from the logic board.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.