Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 4

Step 4
Use the tip of a spudger or your fingernail to flip up the retaining flap on the Bluetooth board ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Use the tip of a spudger or your fingernail to flip up the retaining flap on the Bluetooth board ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Pull the Bluetooth board ribbon cable out of its socket.

  • Lift and remove the Bluetooth board from the display assembly.

Klappe den Sicherungsbügel am ZIF Verbinder des Flachbandkabels zur Bluetooth Karte mit dem Fingernagel oder der Spudgerspitze hoch.

Achte darauf, dass du nur am Sicherungsbügel hebelst, nicht am Sockel selbst.

Ziehe das Flachbandkabel zur Bluetooth Karte aus seinem Anschluss heraus.

Hebe die Bluetooth Karte hoch und entferne sie von der Displayeinheit.

Your contributions are licensed under the open source Creative Commons license.