Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 4

Step 4
Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total). Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).
  • Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).

Rimuovere le due viti Torx T10 da 6,5 mm da entrambi i lati dell'unità ottica, per un totale di quattro viti.

Your contributions are licensed under the open source Creative Commons license.