Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 4

Step 4
Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total). Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).
  • Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).

Retirez les deux vis Torx T10 6,5 mm de chaque côté du lecteur optique (quatre vis au total).

Your contributions are licensed under the open source Creative Commons license.