Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 4

Step 4
Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total). Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).
  • Remove the two 6.5 mm T10 Torx screws from both sides of the optical drive (four screws total).

Entferne die beiden 6,5 mm Torx T10 Schrauben auf jeder Seite des optischen Laufwerks. (also insgesamt vier)

Your contributions are licensed under the open source Creative Commons license.