Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Spanish

Translating step 5

Step 5
Use a spudger to pry the earpiece speaker cable connector straight up, disconnecting it from the motherboard. Remove the mid-frame from the device.
  • Use a spudger to pry the earpiece speaker cable connector straight up, disconnecting it from the motherboard.

  • Remove the mid-frame from the device.

  • During reassembly, reattach the earpiece speaker cable and insert the top side of the midframe before you snap the clips back into place.

Usa un spudger para levantar el conector del cable del auricular hacia arriba, desconectándolo de la placa base.

Remueve el marco medio del dispositivo.

Durante el rearmado, vuelve a enganchar el cable del auricular e inserta el lado superior del marco medio antes de poner los clips en su lugar.

Your contributions are licensed under the open source Creative Commons license.