Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

English
Italian

Translating step 2

Step 2
Remove the two 4.8 mm T6 Torx screws securing the display data cable to the logic board. Grab the display data cable connector by its black tab and pull it straight up off the logic board.
  • Remove the two 4.8 mm T6 Torx screws securing the display data cable to the logic board.

  • Grab the display data cable connector by its black tab and pull it straight up off the logic board.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.