German
English

Saeco Vienna Sup 018 Opening Procedure

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief 1-2 sentence summary will appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1 — Remove the attachments

      Never forget: Pull the plug out!

      Step 2 — Loosen bean container

      The bean container is fixed with two Phillipps screws. Unscrew those. The adjusters of the mill and the coffee can remain.

      Step 3 — Loosen screws

      The lid is equipped with four screws, two at the bottom front, two at the back up. One is a Torx 10, the other cross-slot.

      Step 4 — Lift the lid off

      Now the cover can be lifted off. Pull backwards, then diagonally forward. Remove the silicone hose from the water tank.

      Step 5 — Pull out the mechanical unit

      On the work table, a cloth is laid, the machine is then placed on the back. The turntable may have to be pulled out on the ground eventually.

      Step 6 — Repair

      A view of the unit from behind. Above left the mill, in front of that the flowmeter. On the far left is the Ulka pump, in the middle of the boilers for the fast steam, among the gearbox with the engine. Right below the heater. Right up the control electronics

      Your contributions are licensed under the open source Creative Commons license.