Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 2

Step 2
Insert the flat end of a metal spudger underneath the battery near the bottom of the iPad. Slide the metal spudger approximately 1.5" underneath the battery, releasing the adhesive.
  • Insert the flat end of a metal spudger underneath the battery near the bottom of the iPad.

  • Slide the metal spudger approximately 1.5" underneath the battery, releasing the adhesive.

  • The adhesive is very strong. Loosening the adhesive requires considerable force. Work slowly and carefully, making sure that the metal spudger does not slip.

Inserta el extremo plano de un spudger de metal debajo de la batería cerca de la parte inferior del iPad.

Deslice el spudger de metal aproximadamente 1.5 "debajo de la batería, liberando el adhesivo.

El adhesivo es muy fuerte. Aflojar el adhesivo requiere una fuerza considerable. Trabaja despacio y con cuidado, asegurándote de que el spudger de metal no se deslice.

Your contributions are licensed under the open source Creative Commons license.