Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 2

Step 2
Insert the flat end of a metal spudger underneath the battery near the bottom of the iPad. Slide the metal spudger approximately 1.5" underneath the battery, releasing the adhesive.
  • Insert the flat end of a metal spudger underneath the battery near the bottom of the iPad.

  • Slide the metal spudger approximately 1.5" underneath the battery, releasing the adhesive.

  • The adhesive is very strong. Loosening the adhesive requires considerable force. Work slowly and carefully, making sure that the metal spudger does not slip.

Setze das flache Ende eines Metallspatens unter den Akku am unteren Ende des iPad.

Schiebe den Metallspatel ungefähr 3,8 cm unter den Akku und löse so den Kleber.

Der Klebstoff ist sehr stark. Du brauchst dazu ziemlich viel Kraft. Arbeite langsam und sorgfältig, so dass der Metallspatel nicht abrutscht.

Your contributions are licensed under the open source Creative Commons license.