Skip to main content
English
Dutch

Translating step 2

Step 2
This step is not required if you are moving the drive to an identical Dell computer. To remove the drive clip, remove the Phillips #0 screw holding the hard drive to the clip. Once the screw is removed, remove the drive starting from the side with the screw.
Remove the drive clip
  • This step is not required if you are moving the drive to an identical Dell computer.

  • To remove the drive clip, remove the Phillips #0 screw holding the hard drive to the clip.

  • Once the screw is removed, remove the drive starting from the side with the screw.

  • Remove the drive from the right side by removing the drive from the alignment pin.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.